1.5mm ceramic fiber paper is aluminum silicate refractory fiber by adding a small amount of the binding agent, which is according to scientific selection and strict amount control. Binding agents in use will be completely burned. It’s demonstrated reliable performance and unique advantages, we will generally be appropriate to add some lubricant in production, but what is it the purpose of adding a lubricant? Next we will introduce the reasons, we hope we all can have a better understanding. 

     1. When needling the 1.5mm ceramic fiber paper, lubricant can lubricate the needles, reducing the needle and fiber breakage. In order to reduce the consumption of needles, often by increasing the amount of lubricant approach. 

     2. Act as a lubricant in the fiber, when the roller is pressed, make ceramic fiber paper mutually dislocation possible. It not only can reduce fiber breakage, also improve the smoothness and thickness uniformity of the cotton fiber. 

     3. Avoid 1.5mm ceramic fiber paper fiber-forming process flows into shares bond fiber devices, and helps to reduce the fiber-forming process dust. 

     4. Ceramic fiber paper fibers are not transparent, so that the heat rays can not penetrate the fibers and the fibers are very fine, so that can not be well accepted heat radiation, so the heat transfer effect is not obvious.

     CCEWOOL 1.5mm ceramic fiber paper made by through 9 shot-removal process. Temperature varies from 1260C, 1400C, and 1430C. It can be cut into different sizes and different shapes of the ceramic fiber gaskets according to customer requirements.