Recommended Products
- Ceramic fiber square rope
Ceramic Fiber Rope is a length of fibers, twisted or braided together to improve strength for pulling & connecting and can also be called as fibril or filament. We provide round rope, square rope and twisted rope. Both kind has two type, glass filament reinforced and stainless stainless steel reinforced.
- DJM Insulating brick
Mullite insulating brick, using high pure mullite as raw material, is made by adding alumina powder according to different type and then sintering in high temperature. JM insulating brick is the new energy saving material for insulation.
- Ceramic Fiber Modules
CCEWOOL Ceramic Fiber Modules is made from the corresponding ceramic fiber material acupuncture blanket processed in dedicated machines according to fiber component structure and size.
- Bio Soluble Fiber Blanket
Bio Soluble fiber blanket is a body soluble fiber that utilises a unique spinning technology to create a special fiber with superior thermal and mechanical properties. This special fiber is made from a blend of calcium, silica and magnesium which give fiber the ability to support continuous temperatures up to 1260C.
- Ceramic Fiber Tape
Ceramic Fiber Tapes that are fabricated using high quality ceramic fiber yarn and are reinforced with fiberglass filament & ss wire.
- Ultrathin 6mm Ceramic fibre blanket
CCEWOOL Untral-thin Ceramic Fibre Blanket is a new type of fire-resistant insulation materials in white and tidy size, with integrated fire resistance, heat separation and thermal insulation functions, containing no any binding agent. All CCEWOOL Ceramic Fibre Ultra-thin Blankets are made though spun fiber production, which is widely used in various sectors of refractory, insulation, thermal insulation field.
- Ceramic fiber board for wall-hung boilers and gas boiler
The most outstanding characteristic of CCEWOOL Ceramic fiber board for fireplace and gas boiler is that it enjoys light weight, and at the same time it has high compressive strength./ Compared with the normal ceramic fiber boards of the same density, they are 20% harder; comparing to the ceramic boards of the same compressive strength, they are 20% lighter.
- Ceramic fiber paper
The product shows excellent thermal insulation properties and construction performance, suitable for use in deep processing (multi-layer composite, punching, etc.); and excellent resistance to molten infiltration, allowing itself to be used for casting washer separation in the construction and glass industries.
Top articles
- CCEWOOL refractory fiber achieved great success at ALUMINUM USA 2023
- CCEWOOL refractory fiber attended Heat Treat 2023 and achieved great success
- CCEWOOL refractory fiber will attend ALUMINUM USA 2023
- CCEWOOL will attend Heat Treat 2023
- CCEWOOL achieved great success at THERM PROCESS/METEC/GIFA/NEWCAST exhibition
- Welcome join us - CCEWOOL ceramic fiber is participating in THERMPROCESS/METEC/GIFA/NEWCAST exhibition
- Review of pandemic period 2 - CCEWOOL sticks to its original aspiration
- Review of pandemic period 1 - CCEWOOL sticks to its original aspiration
- What is insulation ceramic paper used for?
- Difference and application of aluminum silicate fiber bulk and rock wool
Latest articles
- CCEWOOL refractory ceramic fiber bulk
- CCEWOOL soluble fiber insulation blanket
- UK customer - CCEWOOL LZ Ceramic Fiber Blanket
- CCEWOOL 1430 ceramic fiber blanket insulation
- CCEWOOL Soluble Fiber Blanket
- Nigerian customer - CCEWOOL Ceramic Fibre Blanket
- CCEWOOL temperature insulation ceramic fiber blanket
- CCEWOOL ceramic fire blanket insulation
- Singapore customer - CCEWOOL Insulation Ceramic Fiber Blanket
- CCEWOOL ceramic fiber wool
Your browsing history
Application of refractory fiber products on heating furnace
This issue we will continue to introduce application of refractory fiber products on heating furnace.
(3) The service temperature of any layer of refractory fiber products should be at least 280 ℃ higher than the calculated hot surface temperature
(4) When the anchors on furnace roof is arranged in a rectangular shape, the distance between refractory fiber products should not exceed the following requirements: blanket width 305mm × 150mm × 230mm.
When the anchors on furnace wall is arranged in a rectangular shape, the distance between refractory fiber products should not exceed the following requirements: blanket width 610mm×230mm×305mm.
The metal anchors that are not covered by the furnace tube should be completely covered by the refractory fiber products cover or protected by ceramic cup filled with plastic ceramic fiber.
(5) When the flue gas speed does not exceed 12m / s, ceramic fiber blankets shall not be used as the hot surface layer; when the flue gas speed is greater than 12m / s but less than 24m / s, the hot surface layer shall be wet blanket, ceramic fiber board or ceramic Fiber module; when the flue gas speed exceeds 24m / s, the hot surface layer should be castable or external insulation.
Next issue we will continue to introduce application of refractory fiber products on heating furnace. Please stay tuned.
leave message to apply
- Your Name :*
- Company Name:*
- Your E-mail:*
- Remarks:*
