Automatic combustion system actually included: Combustion controller, the solenoid valve, flame sensing element, the ignition means.

     Automatic combustion system is one of the prerequisites for a modern furnace automatic control, automatic combustion system embodies the most important safety practices in the use of gas, energy conservation, labor simplify operation and other aspects.

     It is well-known to all that any gas premixing with air is very dangerous. Due to improper gas processing operation, then fire, explosion and countless disasters are occurred, so regardless of design or production operator, we must first consider its safety, while combustion control system just  solves this problem. 

     Firstly, in the absence of the state of flame, the solenoid valve is closed, which prevents the possibility of pre-mixed gas and air, can prevent dangerous accidents due to improper control of the gas.

     Secondly, the use of combustion control system greatly facilitates the operator. It becomes easier and more convenient to carry out ignition operation. The operator can ignite the stove or the gun in one or two seconds, when the gun is stalled, the operator can find and eliminate unstable temperature inside the kiln caused by furnace combustion system failure at the fastest speed, thus to create favorable conditions for firing excellent products.

     Thirdly, in terms of energy efficiency, it prevent any fuel which doesn’t burn going into the combustion inside the furnace and going away with smoke. At the condition of burner control is off, the solenoid valve prevents gas entering the furnace interior.

     More refractory industry information, pls visit: www.ceceramicfiber.com