Welcome to the official website of the ceramic fiber

Website mapadd to favouritesfollow us onFAQ

Zibo Double Egret Thermal Insulation Co.,LtdInitiate a top international ceramic fiber brand

Hot searchesCeramic fiber insulation,Ceramic insulation blanket,Ceramic board,Ceramic fiber,Insulating fire brick

Cooperating with the second largest production base in Asia---Minye Refractory Fiber, a powerful guarantee for CCEWOOL ceramic fiber quality
Current location: Home»Double Egret News Center » Blog » News » CCEWOOL view –advantages of using ceramic fiber as furnace lining

Recommended Products

Ceramic Fiber Cloth
Ceramic Fiber Cloth
CCEWOOL Ceramic Fiber Cloth is a woven fabric made from our high quality ceramic fiber yarn. It is strong, lightweight, flexible, and available in a wide variety of thicknesses, widths and densities. Ceramic cloth contain absolute amount of binder material which is normally burned at lower temperature and does not affect the insulation property.
DJM Insulating brick
DJM Insulating brick
Mullite insulating brick, using high pure mullite as raw material, is made by adding alumina powder according to different type and then sintering in high temperature. JM insulating brick is the new energy saving material for insulation.
Ceramic fiber square rope
Ceramic fiber square rope
Ceramic Fiber Rope is a length of fibers, twisted or braided together to improve strength for pulling & connecting and can also be called as fibril or filament. We provide round rope, square rope and twisted rope. Both kind has two type, glass filament reinforced and stainless stainless steel reinforced.
Ceramic Fiber Modules
Ceramic Fiber Modules
CCEWOOL Ceramic Fiber Modules is made from the corresponding ceramic fiber material acupuncture blanket processed in dedicated machines according to fiber component structure and size.
Ceramic fiber paper
Ceramic fiber paper
The product shows excellent thermal insulation properties and construction performance, suitable for use in deep processing (multi-layer composite, punching, etc.); and excellent resistance to molten infiltration, allowing itself to be used for casting washer separation in the construction and glass industries.
Ceramic Fiber Tape
Ceramic Fiber Tape
Ceramic Fiber Tapes that are fabricated using high quality ceramic fiber yarn and are reinforced with fiberglass filament & ss wire.
Ultrathin 6mm Ceramic fibre blanket
Ultrathin 6mm Ceramic fibre blanket
CCEWOOL Untral-thin Ceramic Fibre Blanket is a new type of fire-resistant insulation materials in white and tidy size, with integrated fire resistance, heat separation and thermal insulation functions, containing no any binding agent. All CCEWOOL Ceramic Fibre Ultra-thin Blankets are made though spun fiber production, which is widely used in various sectors of refractory, insulation, thermal insulation field.
Ceramic fiber round rope
Ceramic fiber round rope
Ceramic Fiber Rope is a length of fibers, twisted or braided together to improve strength for pulling & connecting and can also be called as fibril or filament. We provide round rope, square rope and twisted rope. Both kind has two type, glass filament reinforced and stainless stainless steel reinforced.

Top articles

Latest articles

Your browsing history

    Loading...

CCEWOOL view –advantages of using ceramic fiber as furnace lining

Categories: NewsStars: 3Stars Visit: - Release time: 2016-06-22 16:00:00
Font size:【 Large Middle Small Source: Editor: Author:

     The material of furnace lining should consider many conditions: the max furnace temperature, using condition of ceramic fiber material, atmosphere of furnace and so on. Even if the same kind ceramic fiber material, its using temperature will depend on the application conditions(heat source of furnace, gas components and speed in furnace).

     Coal kilns is a kind of tunnel kilns that operating heating treatment to the wet brick model and finally makes into finished products. The length of coal kilns is about 140 meters, the width can be 3.3m, 3.6m, 4.6m, 6.9m according to the size of brick. The working condition of firing stage is as below:

     A.working temperature is 950c, the max temperature is 1000c-1050c.

     B.1200c high temperature firing stage: according to the highest temperature, the thickness of CCEWOOL ceramic fiber module, total thickness, to calculate the temperature of outside wall. The common working temperature of high temperature stage is lower than 1050c. Adopting CCEWOOL AZ ceramic fiber module which working temperature reaching 1200c as furnace lining can completely meet the need and insure longer service life.The back lining is distant from hot face, so CCEWOOL 1050COM ceramic fiber is enough.

     Ceramic fiber lining has become trend of current furnace lining, which representing the developing level of industry furnaces. Adopting ceramic fiber lining or not will directly determine the using effect, product quality and quantity.

leave message to apply
  • Your Name :*
  • Company Name:*
  • Your E-mail:*
  • Remarks:*
Keywords in the article: furnace lining

Information about ""

Telephone:+86-533-7986860Email:ccewool@ceceramicfiber.com

Factory: Minying Industrial Park, Development Zone, Zibo City Shandong,China

Copyright:ZiBo Double Egret Thermal Insulation Co., Ltd All Rights Reserved